Ways You Can Tell If Your Water Heater Needs Replacing

A broken water heater means no more hot water for doing so many important things around your home. You need to get water heater installation contractors to come out quickly to take care of your water heater problem. If you don’t, you could face days of not being able to wash effectively. If you have a 40 gallon heater, this is usually a good size for an average home. You may want to get a 40 gallon natural gas hot water tank to have access to water heated by gas.

If you are looking for an affordable water heater installation, it often depends on what kind of water heater you want. If you have a regular hot water heater, this often costs far less to install than an always hot water system. A tankless water heater is more expensive and also usually costs more to install. The tradeoff, however, is that it always makes hot water available no matter how much of it you have already used. You can do all of the washing at the same time if you like and not run out of hot water thanks to its innovative water heater design.

No one likes to take cold showers but if your water heater dies unexpectedly, that is exactly what will happen. There are signs it will give you to show that you might soon be needing a new water heater installation. If you do not want to be caught without hot water on a cold day, you should look out for the following signs:

Plumbing fixtures

You have a really old water heater.

Do you even know how old your water heater is? Unless you are the one who put it in and or you oversaw the new water heater installation, you may not know how old it is. If you have not been holding birthdays for your water heater, there is a way to find out how old it is.

The way to find out the age of your current water heater is to look at the serial number on the unit. The serial number on the unit should include the date it was manufactured. For instance, if your serial number is G06123456, the date of manufacture was July 2006. The first digit corresponds to the month in which the water heater was manufactured. G is the seventh letter of the alphabet and that corresponds to the seventh month of the year. The next two digits are the year in which the water heater was manufactured. If you look at your water heater and there is a differently formatted serial number, you should contact the company who made it to get more information.

If you have a water heater that is ten years old or more, you might want to consider having a new water heater installation done. You should think about where in your home you have your water heater. If you think that a water heater leak can do a lot of damage, you may want to look at replacing it before you have to deal with that.

Your water is coming out rusty.

When you are taking a shower or running your sink and you see rust in the water, that is another sign that you might need to think about having a new water heater installation done. If you see this when you are running both hot and cold water, there is something else causing your rust so a new water heater installation will not help.

There is a test you can try before you replace your water heater. Drain a few gallons of water from the water heater. If the water starts to run clear, your problem is not with the water heater but is a problem in your pipes. If the fifth gallon is still filled with rust, you should look into a new water heater installation.

Your water heater talks to you.

Sediment can start to accumulate at the bottom of a water heater. As this happens, it heats up and then begins to harden. As your sediment heats, cools and heats again and then hardens, it will make noise. When this is happening in your water heater, it will bang against the sides of the water heater. The more noise you year, the closer to death your water heater is.

Hardened sediment:

  • Reduces the efficiency of the water heater. It will take more energy to heat your water when there are layers and layers of sediment. When your water heater is not working, you need to install a water heater.
  • The tank gets damages. As the sediment heats and hardens, it damages the walls of the tank. This can actually puncture the walls of the water heater. If you find these small holes, you know the time for a new water heater installation has arrived.

There is water around the base.

When you see water around the water heater, you know there is at least one small leak. One small hole will grow to a large hole and a small leak will become a large one. This is a sure fire sign than you need a new water heater installation done.

Replacing your water heater is a big job. It makes sense to try to wait until you really have to talk to someone about installing a new water heater. If you pay attention to your unit, you can get it in time.




Follow by Email